MSP - Plate magnetic separator

These are intended for separation from easily permeable mixtures with worse pouring properties and higher grain size, which would not fall down continuously through the above described magnetic grids. In their standard modification, they are fitted with ferritic magnets and if required, we can deliver them also in a modification fitted with rare-earth (NdFeB) magnets.                                                                  The adjustable spreading roof is a great advantage of this type; the roof may be used to to route material directly towards the magnetic boards, achieving thus effective magnetic separation as much as possible even if installation is performed under a certain angle.

We produce the plate magnetic separators with the incoming hole diameter of 100, 150, 200 ,250 and 300 mm.

We keep on trying to improve our products and make them even better than ever before. In terms of this philosophy, we started to produce a desk-type separator, which can be - due to its unique demagnetizing system - much more easily and faster cleaned from the accumulated magnetic impurities. This leads to time savings and production efficiency improvements.

From its function and height points of view, this type of separator is identical with the above mentioned separator so it is possible to replace it with a new model, without a need of any modifications. Also, it is equipped with a combing roof and ferrite magnets.