Xiran Technology(Jiangsu) Co.,Ltd

Equipment introduction

Purpose: superfine crushing of raw materials

Model number : XRJ-410   XRJ-640   

                           XRJ-830   XRJ-940

Equipment principle

Materials are smashed by colliding with each other using opposing fluids

The particle size of the product can be ultrafine crushed to a few microns level

Because its structure prevents mechanical wear, the crusher is suitable for use

Large amount of crushed and high wear material

Advantage

The clearance of the grading wheel can be adjusted

Multi-type graded wheelset lightweight material

Such as lithium iron phosphate is particularly effective!

The heat resistance with the traditional jet mill is 60℃

The heat resistance of our high temperature jet mill is 120°C!

Basic configuration

Take care of the contact parts of the raw materials to prevent metal contamination

The particle size will be crushed to a minimum of 0.5mm

Low noise, low durability, high pulverization efficiency

Low energy consumption and easy machine maintenance

The roller gap adjustment is provided with a scale to adjust the grinding particle size

Advantage

You will need Ncas and other liquid materials

The shaft seal section is fully sealed using a mechanical seal assembly plus a gas seal

Moisture will be strictly controlled during pulverization and nitrogen will be added to dry and compress air

High temperature resistance reaches 160℃

A variety of sensors will prevent production from stopping for long periods of time

An alarm will sound when the upper hopper is blocked

The belt will emit an alarm when something happens to it

The roller will also be detected when it is turning empty

Check that the motor stops automatically when the roller is opened

Desk paint will not contain leadous copper and iron components

Share to：

Prev：Ceramic roller machine

Next：Hammer mill

Dry pulverizer

Introduction：The equipment uses the hot air flow generated by the hot air furnace to make the material dry quickly in a short time. Due to the high speed operation of the dispersion wheelApplication：Chemicals, food, medicineMaterial：Powder material, granular material

Details

Application

Parameter

Characteristic

Introduction of drying and crushing machine

The equipment uses the hot air flow generated by the hot air furnace to make the material dry quickly in a short time. Due to the high speed operation of the dispersion wheel, the strong impact air flow and the rotary pressure in the machine are generated, so that the material has good dispersion and high drying efficiency.

The crushing and classification function attached to the equipment, while crushing the material, the advanced classification technology is used to make the size of the dried material in the chamber of the equipment uniform; When adjusting the particle size of the drier, only the rotation speed of the classifier can be adjusted. Easy to operate. The equipment can be applied to different materials in different industries; For high viscosity material, especially suitable for lithium electric material precursor drying project.

Anode material precursor drying cutting-edge equipment!

Instant drying

The temperature at the entrance will be 600℃ maximum

Two powerful knives that rotate at high speed are assembled

Heat efficiency increases and drying capacity increases by 40%

You can use in differential drying

Wet condition

❖Can be used for paste - like water solvent drying

❖Wet powder and clay-like materials can also prevent uneven drying

❖The blade hovers instead to generate turbine airflow, which can prevent attachment

Particle size and water content control

❖Built-in high performance grading wheel　

❖Adjust the speed of the classification wheel and the particle size of the material

❖General air drying can not adjust the size of the material

❖The large particle material is crushed twice after entering the crushing and drying chamber

❖Control the outlet temperature of dryer to slightly adjust the water content of materials

Advantages with general spray drying

❖The spray drying system covers about 50% of the footprint

❖The whole system is simple and easy to maintain　

❖Compared with spray dryer, drum dryer can save 50~70% energy　

working principle

This machine adopts the impact pulverization method, which uses the relative movement of the internal six high-speed movable hammers and the surrounding fixed ring gears to make the materials collide and rub against the hammer teeth and get crushed by impact with each other. The pulverized material is subjected to the centrifugal force of rotation, and is filtered through the sieve hole and then enters the collecting bag.

Principle

The hard, crystalline, fibrous material can be comminuted to 30 μm.

The high-speed grinding knife sifts the material quickly and ensures high output.

The compact and modular design allows it to be integrated into any process.

It is GMP compliant and can be used for aseptic production.

1 set of 5 functions. Transformer control panel standard equipment. Most suitable for research and development, a small number of varieties. It can be simple and practical, with high performance.

The multi-function grinder can perform five kinds of crushing, and the crushing type is selected according to the purpose and use. It has obtained a patent and is a crusher that other companies do not have. Considering the cleanliness, the multi-function grinder that can exchange parts (patented) has won praise from customers. Each comminuted part (part) can be easily disassembled and assembled by a woman, and the detachable washing tub can be cleaned. In addition, the control panel is placed with a transformer inside, so the number of revolutions can be changed to 600~3600rpm. On the control panel options, a touch screen and a dedicated aluminum profile bracket are also provided. The pulverization characteristics of the five parts are shown in the figure below.