FANNO TECHNOLOGIES CO., LTD

The sintering plate substrate is made of special polymer composite materials, which are mixed by screening compatibility.
Made from an advanced sintering process, the molded substation has irregular and fully-connected micron micro-holes.
These micro-holes allow only clean gas to pass through, and microparticle dust is intercepted on its surface for dust filtration.
In addition, the surface of the sintering plate becomes denser, smoother, and more accurate filtration through advanced sintering processes.
At the same time, effectively prevent the work of dust sticky, and the use of gas pulse technology for automatic ash removal
The pressure loss remains stable.

High Filtration Accuracy: The emission concentration is much less than 1mg/Nm³               

One-piece molding design：Using advanced sintering technology to create an extraordinary one-in-one finished product (no bonding).

Excellent Mechanical Performance: High rigidity and high toughness filter material which can be extreme wear resistance. Will extend service life and be used wildly without restriction.

Environmental filter：No addition of PTFE coating – no need to worry about the coating will fall off and reduced filtration efficiency. No PTFE cause environmental pollution. No resin added – no need to worry about the bonding area will fall off causing a shorter service life. Pure polymer composite filter material without any additions, so that the material can be recycled. As a sustainable material to achieve environmental protection.

The main body of the OMEGA R sintered plate uses a variety of polymer compound powders to mix due to the manufacturing process.
It is sintered, and the surface is covered with a microporous PTFE membrane for surface filtration.

During the filtration process, dust
is intercepted on the membrane and does not penetrate into the body of the sintered tube, and is superficially cleaned by powerful pulses,
Therefore, it will not block the main body, resulting in a very high filtering effect and no decay.

OMEGA R sintered plates not only maintain low-pressure drop but also ensure up to 99.9% high separation efficiency and low emission concentration; The strong and rigid body has sturdiness and wear resistance than other filter materials cannot achieve.