TRIAX SAS

SAFETY GATES / PALLET GATES

Swinging safety gate – for simple workstations

The pallet gate type B is a swinging safety gate adapted to workstations requiring simplified means of handling. It allows the operator to work safely whilst charging or discharging loads between different levels.

Its kinematic allows an implementation in almost every workplace.

Safety gates – type C

Vertically sliding safety gate – space gain

The safety gate type C is a space gaining version. When the front gate is closed, the pallet gate frees the landing ground surface and allows a maximum work area.
It is very useful for workstations with little depth. Once the loads deposited, the operator slides the gate and closes the access to the edge of the platform. The whole surface is safe and the operator can pick up the loads without any risk.

Safety gate – type G

Swinging safety gate with front grid

The pallet gate type G has a double functioning: safety gate and grid front protection.

It is equipped with grid on the front side in order to avoid small objects falling down and access through the safety gate during handling operations: it guarantees the safety of the operators on different levels.

Once the loads deposited on the platform, the operator swings over the safety gate. The whole area is safe and the operator can pick up the loads without any risk

Safety gate – Type L

Scissor system safety gate for hoistway handling

The safety gate type L is especially conceived for hoistway handling but can also be used for pallet transfer by means of a fork lift.

It frees the whole height of the workplace.

The pallet gate type L is also very useful for the handling of very high loads (or pallet stacks) manipulated by means of a fork lift.

Safety gates - Type X

The X-type mezzanine safety gate is an overhead gate that is particularly helpful when a fire door or sliding door is in the way. It can be easily installed behind the door and retains the functionality of the door.

The principle of operation corresponds to that of the type B pallet gate: the load is deposited on the platform or mezzanine when the gate is open on the edge of the void. In order to unload the load, the operator tilts the barrier by manipulating the rear guardrail: the pallet gate is closed on the void side and open on the mezzanine side. This allows the operator to remove the loads in complete safety.

TRIAX safety pallet gates are custom designed according to our customers' needs.