The KDW0.1 satisfies high quality requirements. The throughput capacities are between 0.05kg/h up to 10kg/h1) with a convincing accuracy up to 0.1%.
This is based on the isolation of the weighing system (the weighing system is decoupled from the hopper) and the high soluted electronic weighing.
The closed housing is made of an aluminium profile framewith removable macrolon windows. Therefore an easy access forthe cleaning and maintenance work is guaranteed. All partswhich come into contact with the product are manufactured ofV2A (material no.1.4301). At the hopper and the material outlet installations for flange mountings are possible to admit the whole system with over-or low pressure.
The material will betransported out of the hopper (option with level control) by a conveying system in two phases, rough and fine dosing, into the weighing pan. Then it will be emptied in batchestothe conveying channel. The slightest deviation from the set weight will be registrated immediately by the dosing processor DPC 3000 and compensated in the same weighing cycle.
On the outputchannel the material will be equalized to guarantee a homogeneous outlet. As conveying systems belts, vibration channels or vibration belts are at your disposal.Especially for bad flowing materials we recommend the use of vibration belts.
Dosing processor DPC 3000
2.5 litres round-shaped hopper
Belts,vibration channels and
0.05kg/h upto 10kg/h
Customers specific adaptions
660 mm x 270 mm x 590 mm
Approx. 25 kg
1)The capacity specifications depend on the material. The through put is based on material with a bulk density of 1kg/dm3.