"VPureMix® – Magnetic Mixing"
The AWH VPureMix® magnetically driven mixer is designed for applications with the most stringent demands in terms of safety and sterility. A magnetic coupling eliminates the risks associated with conventional shaft grommets, such as leaks and contamination. All the functions are monitored continuously by a sensor, and can be read off and documented directly by a monitoring unit.
The VPureMix® guarantees maximum mixing power and product reliability down to the last drop. The magnetic actuator almost completely eliminates all shear forces and allows full tank drainage during ongoing operation. The mixer head has ceramic bearings, and is characterized by low shear forces and its ability to run dry with zero problems. This means no product residue, gentle mixing even with small quantities of product, and no risk when draining the tank during a mixing operation. The open design of the mixer head makes for any easy cleaning procedure that uses a minimum of water, produces much less wastewater and requires very little time.
"AWH-Connect – A Clean Solution"
AWH-Connect is the aseptic and hygienic connection for your tanks. It is designed to comply with the strict requirements of the pharmaceutical, biotechnological and food industries. Using AWH-Connect will enable you to eliminate or minimize dead space in tanks. AWH-Connect combines the standard seal of a clamp connection as defined by standards such as DIN 32676 or ASME-BPE with the advantages of a block flange, which is welded into the wall of the tank. This allows you to connect a component to a container flush to the wall, close to the product and, above all, without any dead space.
„AWH-Lid – A Tailor-Made Entrance”
Stainless steel tank lids are tried-and-tested sealing components in the production of silo tanks, process tanks, sterile tanks and pressure vessels. Their main areas of use include the food and beverage industry and the pharmaceutical industry. These tank lids differ from conventional flange connections, as their design enables rapid opening and closing. Robust hinges are used in place of the established clamping elements, and ensure that the cover is always centered during closing. The non-pressurized tank lids are supplemented by the pressure dome covers, which are in turn divided into different pressure levels. The pressure levels are dependent on the operating pressure, the temperature and other loads (e.g. an agitator). The sections that come into contact with media are made from the material 1.4404 (316L). In addition to the standard surfaces, we can also offer a wide range of qualities for internal and external surfaces.