Tri-Clamp fittings are ideal for short term process lines and equipment. These types of fittings are often seen in pharmaceutical and chemical plants.
LFR is a flexible connection equipped with a Tri-clamp coupling. Pressing stainless steel 316(1.4571) ferrules onto the flexible connection makes the entire connection airtight and gives it a smooth flow profile. There are many application options, including specific options for weighing and dosing techniques, Atex, foodstuffs, chemical and detection.
All standard Tri-clamp stainless steel 316 (1.4404) sizes are possible from Ø 56mm to Ø 350mm.
DIN 32676 (standard)
ISO 1127 (standard)
BS4825 pt3 (standard)
ASME BPE 2004
ASME BPE 2005
LFR is a flexible connection equipped with a pressed on Tri-clamp coupling. Pressing stainless steel 316(1.4571) ferrules onto the flexible connection makes the entire connection airtight and gives it a smooth flow profile.
There are many application options, including specific options for weighing and dosing techniques, Atex, foodstuffs, chemical and detection.
The Tri-Clamp coupling is extremely simple to fit. Pressure-resistance and the correct assembly are guaranteed with the use of robust Tri-Clamps. This connection uses a seal which is available in many different materials. There is a possibility to supply tool release clamp rings.
De LFDDC is a connector that is assembled using different components and at least one side is fitted with a Triclamp flange connection. The Triclamp connection has the advantage that it is easy to disconnect.
All the different parts that compose the connector make it the most leak tight connector in our assortment.
In addition this connector has been tested and certified and subjected to a specially designed standard operation procedure and traceability program, making it the safest product to use in any high risk production process. Risks could include explosion, leaking of dangerous chemicals, extremely hygienic processes for foodstuffs and so on.
The Hecht Tri-Clamp Bellow is moulded from one piece, providing it’s own seal, meaning a separate gasket ring is no longer required. It is designed for optimal hygiene and to create optimal weighing results. These bellows have a conical asymmetrical design, the bottom angle of 60° prevents powder collection or blockage. No powders can remain behind, which is possible with the conventional spherical bellow. These bellows are suitable for contact with foodstuffs.
The bellow is available for Tri-Clamp connection and is pressure resistant up to 100 mbar. It is suitable for CIP.
- No cervices, no product deposits
- Minimal effect on weighing result
- No joints, cast in one piece, permanently elastic; gas and liquid tight
- suitable for CIP
- Replaceable stabilisation and support ring
- FDA and ECC approved
What differentiates the Conflex connector from our other connectors is it’s inner flow profile. Most of our connectors have a very smooth profile, but the Conflex has the smoothest profile in the market, making it impossible for any product to pile up.
- GMP ‑ compliant construction
- FDA – certified materials
- Solvent resistant
- Very robust materials
- Electrical conductive, suitable for hazardous areas Zone 0, 1 and 2, and also 20, 21 und 22
- No crevices and grooves
- Joints available as flange, Tri-Clamp or tension chain
- Easily removable
- Flexible part of the expansion joints easily removable
- High pressure resistance up to 1,0 bar