WUXI XINGUANG POWDER TECHNOLOGY CO., LTD

Working principle：
This machine uses blades that rotate at high speeds to create a powerful mixing force. The lower blade in the mixing tank suspends the bottom treatment (powder, slurry, etc.) up the barrel, the middle blade is fluidized, the top blade mixes, and the previous baffle is eliminated, allowing the material to be more efficiently mixed. The material is affected by the shear force, dispersed and mixed in a very short time, and reduces the influence on the morphology of the particles.

Machine advantage
1. The joint part of the transmission main shaft and the bottom part of the barrel body is designed with a gas sealing mechanism. The upper seal is compressed air flushing, and the powder is insulated from entering the main shaft seal. The lower seal is used for lubrication and cooling of the heat-resistant grease seal.
2. The exhaust device is provided with a gas bag. After the mixing is completed, the powder on the outer surface of the filter is automatically cleaned under the action of the pulse valve.
3. The blade adopts three sets of multi-layer design. The upper layer tool is V-shaped, the middle layer is one-word type,and the lower layer tool has a large rounded

inclination design, which makes the material form a swirling motion when the material is mixed at high speed, and the material around the inner barrel moves upward along the barrel wall. The center material moves downwards, the mixing is sufficient, and the action time is short, forming a high-speed mixing.
4. The spindle drive adopts multiple XPC powerful narrow V-belts to transmit large torque. The driven pulley is supported by both ends. The spindle has good rigidity and small bending deformation, so that the vibration during operation is small and it is suitable for high-speed rotation.
5. The discharging device adopts anti-rotation cylinder, curved plug, bucket discharge barrel and linear guide slider mechanism.

Equipment principle:

The machine uses its material pump to feed the material into the cylinder. Before entering the cylinder, the mixer is pre-dispersed and wetted. The material is mainly composed of solid and liquid materials. After the material is subjected to the cylinder, the grinding medium in the material and the cylinder is subjected to the stirring action of the disperser, so that high-speed rotation motion is performed together. This causes the solids in the material and some of the particles and the ground media to have a very strong collision with each other, causing friction and shear between them, thus enabling the material to accelerate grinding and fine particles. And the purpose of dispersing the aggregates. However, the ground and dispersed material separates the grinding media through a dynamic separator to allow material to flow out of the discharge tube.

Machine advantage:

1, can achieve large-scale production

2, the ideal particle size distribution

3, can achieve low temperature grinding

4, suitable for using 0.015-0.2mm grinding media

5, uniform energy distribution

6, the structure is simple, easy to disassemble

Working principle：
The product is placed from the top of the conical mixing chamber, and the shaft member with the blade in the middle of the machine runs at high speed. The product is brought from the bottom to the upper part of the mixing chamber by the action of the high speed agitating paddle cone barrel. When the product reaches the top, it falls back to the bottom. This cycle reciprocates to achieve mixing uniformity and modification.
The equipment can also be modified and dried by mixing of the slurry. A spray device can be added to add a surface modifier to the powder. The partition can be heated or cooled by water, and can be equipped with a solvent condensation recovery device.

Machine principle:

The utility model has a cone-shaped mixing barrel and has a central rotating shaft, and the rotating shaft is provided with a blade sliding along the wall of the barrel, and the blade has an angle of inclination with the rotating shaft. The high-speed operation of the shaft produces a strong force to push the product toward the inner wall of the barrel. At this time, the surface of the cone of the barrel rotates at a high speed due to the blade with the inclined angle, so that the powder generates an upward movement along the inner wall, and the tumbling power causes the powder to follow. The inner wall rises to the butterfly head cover, and then returns to the center of the mixer, and quickly falls back to the bottom of the barrel to restart a new round of mixed tumbling movement. The heating plate covering the barrel wall heats the barrel wall and the heat passes through the barrel. The wall is conducted to the material so that the material can be fully mixed and coated.

Working principle：
The machine is completely physically processed, allowing the two substances to be completely fused together into a completely new substance. The use of external mechanical forces to completely attach (or inlay) a material to another material creates a completely new material. The new material contains the properties of both materials. For example, the ultrafine ceramic powder is fused to the surface of the metal particles, so that we can obtain a new material that has both magnetic properties of the metal material and surface insulation. This is the direction of the future development of high-tech materials. 
Mechine advantage
1、Short operating time
2、No need to dry or heat after processing
3、Allow the passage of inert gas
4、Allows control of internal powder temperature, even for heat sensitive materials
5、No liquid adhesive, good product quality
6、Increase tap density
7、crushing reunion
8、Good uniformity and stability