FRITSCH GmbH

With the new FRITSCH Laser Particle Sizer ANALYSETTE 22 NanoTec particle measurement becomes a simple matter, for professionals as well as for any employee – in production and quality control or in research and development. No prior knowledge is required. Just start the programme, select a SOP and add the sample – the rest takes place completely automatic. Fast. Reliable. Efficient.

Your advantage: extremely simple operation, short analysis times and consistently reproducible and reliable results. And a convincing combination of price and performance.

New optical design

Measurement design for the lower particle size range

The very large measuring range from 0.01 µm to 2100 µm of the ANALYSETTE 22 NanoTec results from the combination of two lasers with two different measuring cell detector spacings: Large particles are detected using an infrared laser with a large distance to the measuring cell, for small particles a green laser with a small distance to the cell is used, which permits the detection of the forward scattered light up to a scattering angle of 65°. The measurement of smallest particles down into the nano range is performed by the green laser light for backward scattering. Specially arranged detectors ensure this. Especially convenient: The total measuring range of 0.01 – 2100 µm in the ANALYSETTE 22 NanoTec can be detected without converting the optical elements.

Intelligent modular design

Always the right dispersion module: The measuring cell is simply switched to change the dispersion

The ANALYSETTE 22 NanoTec consists of a compact measuring unit that can be quickly and easily combined with different dispersion units for dry or wet measurement. Select the wet dispersion unit for wet measurements of solids and suspensions. For wet dispersion of very small quantities, the automatic small volume wet dispersion unit SVA with illuminated dispersion bath and the compact manual small volume wet dispersion unit SVM are available. The practical, fully automatic AutoSampler makes it easy to perform a series of measurements with the wet dispersion unit. For dry measurements of not too fine, free-flowing materials use the dry dispersion unit with efficient degradation of agglomerates. For dry measurement of agglomerates or free-flowing materials, choose the falling chute.

Your advantage: This allows you to buy only what you need for your applications.

Practical fast-switch-system

The measuring cells of the ANALYSETTE 22 dispersion modules are located in practical cartridges that can be exchanged with a single motion when switching between wet and dry measurement – without changing any hoses or modifying the instrument! Your advantage: fast and easy change of the dispersion method.

So simple, but also very flexible!

The ANALYSETTE 22 NanoTec software contains completely predefined Standard Operating Procedures – SOPs for short – for nearly all typical measurement tasks, making operation especially easy. Via a well-arranged input mask, you are completely free and flexible in modifying these SOPs to perfectly suit your measurement requirements.

Perfect fully automatic evaluation

For the control, recording and perfect evaluation of your measuring results your ANALYSETTE 22 NanoTec is delivered with a computer on which the FRITSCH MaS control software is already fully installed. The software MaS control is easy to learn and guides you through the entire measurement process in a largely self-explanatory manner. In addition to integrated standard reports, the freely editable report generator allows you to organise your measurement reports exactly according to your needs. Your advantage: Simple, secure, flexible.

Your advantages with the ANALYSETTE 22 NanoTec

• Measurement even of nano particles in an extremely wide measuring range of 0.01 - 2100 µm
• Fast, automatic particle size analysis
• Simple measurement with short measuring times
• Especially high measurement precision due to the analysis of 110 channels
• Consistent reproducibility - reliable comparability
• User-friendly operation
• Quick change between wet and dry measurement
• Fast and simple cleaning
• Short analysis times

Fast. Safe. Easy. - Discover the Possibilities!

The FRITSCH ANALYSETTE 28 ImageSizer for dry and wet measurement is the ideal Particle Sizer for all applications that require accurate and reproducible measuring results for both particle shape and size. The optical process of Dynamic Image Analysis provides results for a wide measuring range, delivers multiple shape parameters and evaluation possibilities for particle size. The measuring time depending on the sample quantity, is under 5 minutes. And the result is available immediately.

Your advantage: Great flexibility for different measurement tasks for particle sizes of 20 µm – 20 mm in quality control, research and laboratory – and is a very easy and cost-effective alternative to sieving.

Easy wet measurement of suspensions and emulsions

The ANALYSETTE 28 ImageSizer is in combination with the corresponding wet dispersion unit ideal for measurement of particle shape and size of suspensions and emulsions.

Wet dispersion is particularly suitable for fine particles, poorly flowing, fine-agglomerating or sticky materials, which do not react in water or other liquids.

Your advantages

• Extra wide measuring range of 20 μm – 2.8 mm
• Strong, freely adjustable ultrasonic power for deagglomeration
• Extremely quiet dispersion with strong pumping power
• Benzine, alcohol and many organic solvents can also be used as suspension liquid as a standard feature
• Automatic rinsing cycle
• No dead space in measuring and rinsing circulation system
• Fast and consistent cleaning

Efficient dry measurement of powders and bulk solids

The ANALYSETTE 28 ImageSizer is the ideal Particle Sizer for fast analysis of particle shape and size of dry, free-flowing materials. Via the optical analysis of the particle shape and particle size, you can identify damaged particles, contaminates, agglomerates or oversized and undersized particles accurately and fast and view them completely uncomplicated in single images.

Your advantages

• Extra wide measuring range of 20 μm – 20 mm, individually adjustable
• 3 telecentric lenses are available
• Up to 75 images per second
• Agglomerates are preserved
• Practical Clean Design of the measuring chamber
• Optimal number of particles due to automatic adjustment of the feeder
• Easy handling

State-of-the-art, simple and fast evaluation via FRITSCH Cloud and Gallery

The evaluation of the measuring results is uniquely simple with the ANALYSETTE 28 ImageSizer. The evaluation software ISS displays each recorded particle clearly as a data point in the immediately available FRITSCH Cloud as well as in the FRITSCH Gallery. You freely choose which statement is of interest to you: for example the Sphericity in regards to the Minimum Feret Diameter, the aspect ratio, applied on the porosity, or the convexity as a function of the particle Cross Section. Or display the particle size distribution as a cumulative curve, as a bar chart or in a table form.

The FRITSCH Cloud: Each particle can be clicked individually

The state-of-the-art of uncomplicated evaluation: For fast single image viewing, each individual particle can be opened directly with a mouse click from the clearly arranged FRITSCH Cloud. The really important information for you about the morphology will be shown by the position of the data point in the Cloud. Without time-consuming search, you can immediately analyse, evaluate and delete individual selected particles. All available size and shape parameters are automatically displayed.

Test the FRITSCH Particle Sizers!

Send us your sample for an individual sample measurement – we will send you a detailed analysis protocol. Compare for yourself!

Up-dated information on FRITSCH high-tech particle technology – from Dynamic Image Analyis to Static Light Scattering at www.fritsch-international.com/particle-sizing.

Faster, simpler, safer

FRITSCH Planetary Mills premium line

FRITSCH Planetary Mills premium line are extremely strong all-purpose mills that offer premium performance, usability and safety. Due to revolutionary rotational speeds of up to 1100 rpm, ultra-fine results are achieved by powerful wet and dry comminution of hard, medium-hard, soft, brittle and moist samples by the high-energy impact of grinding balls in rotating grinding bowls. Your advantage: extremely short grinding times and reliably reproducible results down into the nano range. FRITSCH Planetary Mills premium line are also a perfect choice for highly efficient mixing and homogenising or for mechanical activation and alloying in materials research.

Convince yourself!

High-performance grinding down into the nano range – Planetary Mill PULVERISETTE 6 premium line:

• Extra strong 2.2 kW drive power and extremely high centrifugal acceleration up to 64 g and up to 800 rpm (rotational speed of the bowl 1600 rpm)
• Motor-driven ServoLOCK clamping of the grinding bowls
• Safe and user-independent reproducible clamping
• 2 grinding stations for grinding bowls 150 ml, 250 ml and 500 ml volume
• Intuitive touchscreen operation with colour display

Nano grinding for small quantities – Planetary Micro Mill PULVERISETTE 7 premium line:

• Extra strong centrifugal acceleration with up to 95 g and up to 1100 rpm (rotational speed of the bowl 2200 rpm)
• Extremely fast bowl changing due to SelfLOCK clamping
• 2 grinding stations for grinding bowls 20 ml, 45 ml and 80 ml volume
• For the first time grinding bowls and lid form a single unit
• Intuitive touchscreen operation

Grinding has never been safer!

Ideal for sample preparation in the areas of: Geology and Mineralogy, Metallurgy, Ceramics, Material Research/Mechanical alloying, Nanotechnology, Pharmaceuticals, Chemistry, Biology, Sample preparation for analysis.

Test the FRITSCH Planetary Mills premium line!

Send us your most difficult sample – we will carry out a complimentary sample grinding for you. Compare for yourself!

Ideal for size reduction of soft to medium-hard, tough-elastic and fibrous materials as well as for heterogeneous mixtures. They are indispensable in the areas of environment, plastics, agriculture, forestry, construction materials, textiles, chemistry and as well as for analytic and sample preparation for RoHS-analysis.

Unmatched ease of cleaning

A particularly important criterion for a Cutting Mill is the question how fast and easy it can be cleaned in daily laboratory use. Therefore we have placed particular value on the easy cleaning when we developed the FRITSCH PULVERISETTE 19.

While you are still tightening the screws on other mills, your FRITSCH Cutting Mill is already clean!

Because the entire grinding chamber can be opened easily in seconds and both the rotor and the sieve can simply be removed with simple motions. Only at FRITSCH Cutting Mills it is possible to lift open the entire top part of the housing as well as the door – in fact, the door can be completely removed. And that’s not all: The rotor of the FRITSCH Cutting Mills can be removed easily without tools for quick cleaning in between and it can be turned by hand, when the mill is open.

The result: a completely open and empty grinding chamber with minimal dead space for easy and quick cleaning – a secure protection against cross contaminations!

Opening up possibilities: the FRITSCH Cyclone separator

In connection with the PULVERISETTE 19, the patented FRITSCH sample exhauster with Cyclone separator ensures with its powerful vacuum function, based on negative pressure a simple feeding, fast throughput and good cooling, effectively prevents sample material from escaping during feeding and opens up new possibilities in the processing of heterogeneous mixture of materials, such as derived fuels in the cement industry.

By the way:

FRITSCH offers 5 different models of Cutting Mills, with max. feed sizes from 70 x 70 mm – 120 x 85 mm, max. throughput from 50 l/h up to 85 l/h, final finesses from 0.2 – 20 mm and rotational speeds from 300 – 3400 rpm – for each application the perfect Cutting Mill!

Practical application examples as well as comparison grindings can be found online at www.fritsch.de in the area SOLUTIONS.

NEW: powerful model for gentle size-reduction

Now the Universal Cutting Mill PULVERISETTE 19 is also available with 300 to 360 rpm. This combination of low cutting rate and extreme cutting forces (power consumption 3240 Watt) ensures an extremely powerful size reduction of hard, tough-elastic samples or smaller sample amounts – and is the ideal solution in all cases in which, for example thermal damage, the loss of easy volatile substances or a larger fine share should be avoided. More info at www.fritsch-milling.com/p-19108000.

Test the FRITSCH CUTTING MILLS!

Send us your most difficult sample – we will carry out a complimentary sample grinding for you. Compare for yourself!

Up-dated information on the FRITSCH Cutting Mills for efficient sample preparation at www.fritsch-milling.com/cutting-mills.

You can view both videos at:

Video: How the FRITSCH Cutting Mills work: www.youtube.com/embed/GtEOcidZS4w?rel=0

Video: Cleaning of FRITSCH Cutting Mills – fast, easy, safer: www.youtube.com/embed/Nlk5B2c-jhM?rel=0

Variable Speed Rotor Mill PULVERISETTE 14 premium line!

The NEW high-tech standard!

The FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line offers impact, shearing and cutting comminution in one instrument – with a higher performance, better cooling and significantly quieter than comparable instruments. Its powerful motor is ideal for the particularly fast comminution of soft to medium-hard, brittle as well as fibrous materials and temperature-sensitive samples with an extremely fast sample throughput of up to 15 litres and more per hour, depending on the material and parameter settings.

Overview of the premium features:

• Powerful grinding with 22,000 rpm for particularly fast sample throughput
• Max. feed size < 15 mm, sample throughput of up to 15 l/h and more
• AutoLOCK grinding chamber for particularly safe work
• Final fineness down to d50 < 40 μm, sieve rings 0.08 – 6 mm
• Particularly good cooling of the grinding material
• Pleasantly quiet operation
• Very easy to clean due to Clean Design

FRITSCH premium advantage: Especially powerful

A high-speed motor with ceramic bearings ensures a particularly high impact and rotor speed with an extra powerful 22,000 rpm.

Your advantage: finer results in shorter times.

FRITSCH premium advantage: Significantly better cooling

The new PULVERISETTE 14 premium line cools your sample during grinding significantly better than comparable instruments.

Your advantage: melting or sticking of the grinding material is greatly reduced, even with temperature-sensitive samples.

FRITSCH premium advantage: Incredibly safe operation

The new AutoLOCK grinding chamber facilitates automatic opening and closing with clamping and crushing protection. The additional Intelligence-Safety-Control-System only allows the instrument to start if the grinding set is fully and correctly inserted.

FRITSCH premium advantage: Fast, residue-free cleaning

The well-conceived Clean Design covers all the areas, which make the cleaning of your mill as easy as possible: All the surfaces are designed to be extremely dirt-resistant and easy to clean. And all the parts that need regular cleaning can be removed with a single motion without tools. Even the lid of the instrument can be easily removed for cleaning.

FRITSCH premium advantage: 2 instruments in one

Turn your Variable Speed Rotor Mill PULVERISETTE 14 premium line into a Cutting Mill with just a few simple motions for fast, efficient pre-grinding of fibrous materials and plastics – in an optimised mode with up to 10,000 rpm. Absolutely multifunctional with the choice of grinding with an impact or cutting rotor!

You can view a video on the Variable Speed Rotor Mill PULVERISETTE 14 premium line at: www.youtube.com/embed/Rn3nWGQD9mM?rel=0

Test the FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line!

Send us your most difficult sample – we will carry out a complimentary sample grinding for you. Compare for yourself!

Up-dated information on the whole FRITSCH range for efficient sample preparation with videos at www.fritsch.de.