Bürkle GmbH

Stainless steel V4A (1.4404)
25-mm diameter

The all-layer drill is a special zone collector specifically designed for heavily compacted substances. Often it is very difficult or impossible with conventional zone collectors to penetrate media of this type and take a sample extending through all layers. By contrast, the drilling blades of the all-layer drill burrow easily and quickly to the required depth without expending any great force. This makes it easy to take samples of media, even those with high density, and every type of highly compacted powders and granulates.

The all-layer drill thus allows you to take a representative sample through all the layers, even with greatly compressed media.

It is ideal for larger containers, mixed containers, big bags, etc. in the building materials, chemical, pharmaceutical, food and luxury items industries.

Use

• The all-shift drill is screwed manually into the bulk material
• The chambers are opened at the desired sample depth and the sample material flows in
• Close the chambers
• Remove or unscrew the all-shift drill
• Empty the sample through the open inner tube

If bulk goods are transported over long distances (in trucks, freight cars), separation may occur. If a sample is then taken from the surface only it will not be representative. The SiloDrill can take samples from deeper layers. With 90 mm diameter, the SiloDrill fits for all openings of conventional silos. SiloDrill is available made of stainless steel (1.4301) or aluminum.
 

• Of stainless steel V2A (1.4301) or aluminium
• Standard length 150 cm, extendable in increments of 100 cm, max. 350 cm
• Sprung inner tube prevents jamming of coarse grains
• Scraper edge for cohesive substances
• Sturdy, removable T-handle
• Drill tip with drilling blades for easy boring
• Easy removal of the sample chamber, simple cleaning

• for point sampling, multi point sampling, all-layer samples 
• to take samples from sacks, silos, bags etc.
• suitable for powder or granules

Zone-samplers are used for sampling all types of bulk goods, from the finest powders up to coarse grains such as corn or nuts. To take a sample, the sampler is inserted directly into the sampling good or the container (sack, Big-Bag etc). The sampler is filled through opening of the sample chambers, and the sample can be taken. 

Use

1. Turn the handle, close the chamber.
2. Insert the sampler to the required depth.
3. Open the chamber, sample flows into the chamber.
4. Close the chamber.
5. Pull out the sampler.
6. Close the insertion opening with the close-it control seal.

• The labels are supplied in handy rolls
• The cross perforations allow each label to be separated from the roll individually

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/ paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together. The label is not just used to provide a hermetic seal. It is also used for providing quality control information (sampling date, release yes/no, name of tester, etc.).

The labels are available in different colours. With printing in red, blue, green, yellow, black, neutral, without printing in white.

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.

Especially for the food and pharma industry also available as close-it food & pharma.

• PS, white
• Individually packaged
• Production, assembly and packaging according to clean room class 7
• Complies with EU food requirements and FDA regulations
• Optionally sterilised by gamma rays

Bürkle LaboPlast® products – scoops, spatulas and spoons – are high-quality, ergonomically shaped disposable products that are specially designed and optimised for sampling purposes. They are produced, assembled and individually packed in Bürkle’s own clean room. The SteriPlast® Samplers are also sterilised by gamma rays (min. 10 kGy).

Also available in blue or as detectable version.