MIXACO

The MIXACO container mixer is the “jack-of-all-trades” among industrial mixers and is suitable for use in all areas in which high-quality materials are used. It is extremely flexible and offers a volume of 6 to 2000 liters, depending upon model. With its numerous individual tool possibilities, any desired mixing result can be dependably obtained.

Container mixer CM MT “Multi Tool”

The special positioning and use of combination mixing tools results in high dispersions and homogeneity to be achieved without transferring excess mechanical energy into heat in the product. This makes the MT mixer ideal to process heat sensitive materials previously problematic to process in conventional mixers. Within the mixing chamber two different material flows are created –the primary flow and the secondary flow. The slowly running transport tool continuously transports material (primary flow) into the operating area of the crusher drive (secondary flow). The combination of material flows ensure that the material is quickly mixed and high dispersion rates are achieved. The temperature increase in the MT container mixer is up to ten times less than in conventional mixer– typically between 0.5 and 1°C per minute.

With the Speedy D 200 Mixaco has developed a mixing solution which connects the advantages of the SPEEDY mixer by using of standardised 200 l steel drums as mixing containers.

Besides powders and granulates, liquids can also be mixed.First, the appropriate tool for the mixing job in hand is lowered into the container, where the product is then very gently homogenized or dispersed without its temperature increasing. The container can be conveyed to the next processing station directly after mixing. The MIXACO Speedy mixer is a practical solution in terms of internal logistics: the product is weighed, mixed, moved and stored in the same sack or drum.

Easy handling, rapid cleaning cycles and direct mixing in the steel drum make this mixing technology a cost-effectively and efficiently solution for the user.

MIXACO Heating/Cooling Mixer

MIXACO’s combined heating/cooling mixers are the optimum solution for complex mixing challenges. The systems are characterized by their outstanding product preparation in the heating phase and high-efficiency cooling performance. The horizontal and vertical heating/cooling mixers are designed for high-volume throughput, rapid processing and short cleaning times.

Heating mixer dependably perform its work, which mainly consists of heating the PVC mixture in the heating mixer and dispersing additives during mixing. After this, the mixing material is cooled down again in the cooling mixer. Due to the optimum design of the heating and cooling mixer, this mixer combination is ideally suited as a high-performance mixing system, for example for the areas of PVC Dry Blend for window profiles, pipes, films, etc.

Mixing without loss of space – that is one strength of the MIXACO Speedy. Because there is no dead space in the round container. During the entire work process – from filling to mixing to transport and emptying - the mixing material remains in the sack.

First, the appropriate tool for the mixing job in hand is lowered into the container, where the product is then very gently homogenized or dispersed without its temperature increasing. The container can be conveyed to the next processing station directly after mixing.

The MIXACO Speedy™ is a practical solution in terms of internal logistics: the product is weighed, mixed, moved and stored in the same sack.

And the sack mixer demonstrates its other strength during emptying: Sack and mixer do not have to be cleaned, because the mixing material is not transferred, but rather transported to and from mixing in the sack – a clean and time-saving ideal.

Even liquids can be mixed, the MIXACO Speedy SD 50-100 was specially developed for this purpose!

With the „tool-free“Mixer REVOLUTION, MIXACO has created the opportunity to homogenise granulates in a gentle manner. (Without any disturbing abrasion and dust)

Due to the low drive power a very energy efficient and economically interesting homogenization of several batches is possible.

Corresponding to his high degree of flexibility the REVOLUTION can be used for the most various applications. No matter whether it concerns the controlled (and gentle) tempering of materiel mixtures or the uniform wetting of granulates by liquids like peroxide, the REVOLUTION can be adapted to the requirements of the customer.