TransiTec Anlagenbau GmbH

Big Bag Filling and Emptying station

The frames are provided with forks to allow handling with fork-lift truck or pallet carrier and is provided with height-adjustable hooks

Many options are available:

• Filling nozzle with rapid bag clamp. Easy handling: with only one hand, both of the 2 semi-circular brackets are actuated in parallel), alternatively:
• Filling nozzle with inflating sleeve: the filling nozzle of the big bag will be put over the inflating sleeve.

The inflating sleeve will be blown up and seals up.

• Vibrating big bag supporting platform

Supporting platform mounted on vibration absorbers. The product will be compacted within the bag thanks to the installed vibrating unit.

• Height adjustable big bag hook in frame

Tightening of the big bag thanks to linear gear with electric motor, pneumatic cylinder or hand crank.

• Filling nozzle with distribution device to spread the product within the bag.
• Big-Bag hung-in frame mounted on load cells for weighing the free hanging big bags. Possibility to calibrate and print labels.

Discharge and metering unit DZR

The discharge and metering unit DZR is constituted of a bag emptying hopper with discharge aid for poor flowing and bridging solids.

The cylindrical hopper design secures a constant product flow. A discharge arm, rotating just above the flat hopper bottom, ensures a constant filling degree of the feeding spiral underneath the bottom. As soon as the lid is opened, the ventilator starts to aspirate all the generated dust while emptying a bag. After closing the lid, the filter will be cleaned automatically.

This unit is available in beat blasted stainless steel or in epoxy coated carbon steel. The metering capacity goes from 3 litres up to 15.000 litres per hour, depending of the size of the metering tube and of the used spiral. This unit may be fitted underneath a bag emptying station, a hopper, big bag emptying station, or even a container emptying station.

Mechanical and Pneumatical Conveying

Mechanical conveying:
Flexible spiral conveyors type SR and FR
The TransiTec flexible spiral conveyor can be used for the conveyance of all kinds of bulk materials, granulates as well as powders, and can be applied to many industrial fields.

Benefits of spiral conveyor:

• noiseless and dustfree operation
• low energy demand
• easy installation and shortening of the conveyor
• Conveyance of mixtures of several components without any segregation
• Vertical conveyance thanks to integrated centre core
• Maintenance-free
• Output up to 20 m3/h, dependent an material characteristics
• Range of application: plant processing, foodstuffs, chemical and phormaceuticcil industries,...

Pneumatical conveying:

Our pneumatic conveyor series S-WS offers all required accessories such as:

• Electrical control cabinet with integrated freely programmable steering - setting of the suction time; calibration of the filter cleaning.
• Electrical control box and side channel blower mounted on welded frame - the frame is optionally mounted on guide rolls with positioners.
• Removable top for filter cleanse – with clamps for vacuum-tight closing.
• Various filter sizes with suitable face up to 10 m2.
• One big product outlet nozzle ensures a free and quick emptying of the product precipitation hopper.
• Automatic filter cleaning after each suction operation by means of intermittent cleaning with compressed air.
• A big compressed air storage vessel ensures the adequate impulse intensity.
• The design of the pneumatic conveyor depends of the product which has to be conveyed., the conveying distance and the required throughput. The design occures depending of the volume of the product precipitation hopper and depending of the throughput of the side channel blower.

Tip sack hopper with or without dust filter

We deliver tip sack hopper in 2 vdifferent designs:
in case of good flowing products, we use conical hoppers, on which we can easily fit a spiral conveyor. In case of bridging or poor flowing products, we will use cylindrical hopper, combined with our discharge and metering device DZR.

For each kind of those storage hoppers-if cylindrical or conical- TransiTec delivers on demand also sack emptying units, consisting of an assembly with lid and a sack support board.

This assembly consists either with a connection to the main dust collector or is provided with a own Filter:

• the standard filter has a filtermaterial made of polyester with a surface area of 9,8 m2
• the motor ha a capacity of 1500 m3/h
• he will be cleaned automatically thanks to compressed air as soon as the lid of the sack emptying unit will be closed.

On request, we are able to deliver this kind of filter confirming to ATEX for a service in explosion-proof area.