MOLLET Füllstandtechnik GmbH

The maintenance free level indicators of the MF-series are an appropriate alternative for level control applications with dusty, powdery, or granulated bulk material. They are perfect suitable as jam indicator at drains of screw conveyors or feeders as well. The big advantage of these robust and very reliable measurement devices is that no power supply is necessary. Therefore the installation and operation of these level controllers is very simple and cost-efficient.

You can get all of these quality products with ATEX approvals for use in gas and dust explosive hazardous areas. These point level sensors can be adjusted to the specific application with different housings and membranes.

MWF the TDR for bulk solids - Continuous level measurement
The maintenance free MWF from MOLLET with ATEX approvals is the best choice for all continuous level measurement applications in bulk solids and almost any liquids. This Guided Microwave Radar (TDR instrument) is unaffected by changes of product, pressure, dust or temperature. Therefore it is extremely reliable and easily to install. Due to the wide measuring range from 0.1 to 20.0 meters it is suitable for small bins as well as for large silos.

The pinch valves of the QV-series are the ideal solution for the shutting off, distributing, and dosing of powdery and grained bulk goods; viscous, soiled, and aggressive liquids; gases and mixtures. Typical applications are pneumatic conveyors and fillings lines for silos and tanks in the food industry, chemical industry, environmental industry, and construction industry. Due to the straight and not reduced passage through the valve there are no jams and no reduction of the feed pressure. Long service life of hoses and easy change of these if needed are a matter of course.

The pinch valves of the QV-series are available with ATEX approvals for use in gas and dust explosive hazardous areas. The different types of the valves enable the optimal adjustment to the specific applications.

The maintenance free level indicators of the DF-series are the best choice for all level control applications in bulk solids. It doesn't matter whether it is dusty, powdery, or granulated bulk material; these measurement devices guarantee high reliability and safe operation even in very hard and extreme applications. The level measurement of sludge and pastes is no problem as well.

You can get all of these quality products with ATEX approvals for all potentially explosive dust and gas atmospheres as well as for hybrid mixtures. They are even suitable for applications with process temperatures up to 1.000°C and process pressures up to 25 bars. Such a wide range of applications make these rotary paddle switches unique in the world market.

As a matter of course our point level sensors are almost unlimited configurable and can be optimal adjusted to any difficult application.

The new MOLOSbob LF20 from MOLLET is the best solution for an easy and reliable continuous level measurement of bulk solids in silos and bunkers up to a maximum measurement distance of 42 meters. Simple installation and an error-free operation although in case of changing bulk materials or process conditions characterize this measurement device that can be used for process temperatures up to 150 °C. MOLOSbob, the compact and robust measurement device with a tape made of stainless steel supplies accurate measurement results unaffected by bulk goods characteristics like dust, moisture, conductivity or grain size. This measuring device with low weight is although suitable for the use in dust explosive areas of category 1/2D. Furthermore the newly developed safety circuit avoids the run down of the sensing weight into the silo outlet area. Special designed tape wiper avoids pollution of internal housing.