BOLZ INTEC GmbH

Profit from our expertise and many years’ experience in the pharmaceutical industry.

Materials, liquids, etc. are transported, as well as stored sterilely and safely, in BOLZ INTEC pressure vessels. Wellknown pharmaceutical companies have trusted BOLZ INTEC pressure vessels for years. BOLZ INTEC designs and constructs each of these containers exactly according to your requirements. GMP compliant and strictly according to the Pressure Vessel Directive.

NEW: Standardised pressure vessel line .

3 sizing’s with different volumes:

• Diameter 234 mm with 5, 10 or 20 litres volumes
• Diamter 395 mm with 30, 50 or 100 litres volumes
• Diameter 560 mm with 100, 150 or 200 litres volumes

Standard: Triclamp nozzles after DIN 326776. More components can be arranged from a modular kit construction.
 

Using EPTS from BOLZ INTEC you can safely transport your solids within your plant. The closed container system guarantees emission-free transport of the products, e.g. from the weighing room to the reactor.

The EPTS consists of a container that is equipped with two flap valves mounted at both openings. A funnel (for filling) and a CIP chamber (for cleaning the entire system) can optionally be mounted on the valve of the container top. The flap valve on the outlet of the transfer container is provided with the particular connection to the reactor to be filled. In addition, a transport trolley specially designed for this system is also available.

Environmentally friendly, product--protection, and in line with safety at work concepts!

BOLZ INTEC not only produces single units or small batch series but is also involved in the further development of existing products with an eye on cost-effectiveness as well as budget savings and resource conservation.

For this reason, BOLZ INTEC has developed a price-optimised stainless-steel drum with flat bottom, the Best-Cost-Drum, for single-use application or as dedicated equipment. For the Best-Cost-Drum with a border, BOLZ INTEC uses thin stainless steel, e.g. 1.4301. The drum is available with a diameter of 450 mm and a volume of 100 l or a diameter of 560 mm and a volume of 200 l. With the kit, both a lidded version and a tight-head version are possible. The floor and, for tight-head drums, also the top part are pressed into the prepared shells. TIG welding is then safely performed on the shell outside of the part that comes into contact with the product. The optional border of the lower edge of the shell helps to provide the highest degree of stability and sturdiness. When used as a lidded drum, the shell at the top is also available welded tight or open. The drum is then sealed using a standard lid with seal and clamping ring.

When using as a tight-head drum, the prepared top part is also pressed in and safely TIG welded. There are several variants of opening available, including Tri-Sure, Tri-Clamp fitting or dairy coupling.

The patented Best-Cost-Drum is suitable for multiple use as well as in cases where raw or basic materials can only be used once due to the long transport routes and the associated costs but the high cleanliness standards must still be satisfied. There is no need for cleaning here, thereby saving considerable time and money.