CIP / SIP / WIP cleaning concepts
Modern plant engineering, especially in the pharmaceutical and food industry, comprises the planning and implementation of error-free cleaning plants.
The demands on these systems are of increasing importance in the food and pharmaceutical industry.
An effective cleaning comprises the removal of residues and particles with a through-flushing of the system components and conduits. An optional subsequent disinfection destructs organism. CIP and SIP describe a localized cleaning of process plants, whereas WIP requires a much higher amount of manual work in the cleaning process. Wellmann engineering brings unlimited flexibility to its customers and offers customized CIP / SIP / WIP solutions for the cleaning process and sterilization for all requirements. To ensure highest product quality all technical and pharmaceutical requirements are always considered, depending on the validation requirements and the manufactured pharmaceutical product.
For years Wellmann Engineering successfully designs and implements CIP / SIP /WIP systems according to our customer´s needs. The scope of service includes planning services, the development of an automation concept as well as the installation of the plant, components and pipelines. Wellmann supplies process plants and cleaning concepts: from one single source.
As a supplier for process plants and cleaning concepts Wellmann offers all-in-one solutions to its customers.
In addition to planning services also include the development of the automation concept and the installation of the equipment, components and piping of the scope. Wellmann supplies equipment and cleaning concepts all from one source.
CIP systems (cleaning in place)
Usually CIP systems are fully automated, with fixed defined cleaning programs and variably adjustable temperatures.
Due to the high degree of automation a faster cleaning, water and detergents reduction and less effort is achieved. CIP systems are fixed units and require little or no assembly / disassembly work. By a programmed pre-purge particles are flushed out. The cleaning temperature is around 90°C depending on specific applications. After flushing, the pipelines and components are pumped with lye. After flushing with water, a final acid rinsing proceeds.
SIP systems (sterilization in place)
The SIP method uses a higher temperature than the CIP process to kill microorganisms.
Media used in this method are hot water or saturated pure steam. The sterilizing effect of temperatures up to 140 ° C is supported by sprayed disinfectants. Normally SIP is equipped with the same installation as CIP which is the previous cleaning step. Particularly in the pharmaceutical industry SIP is a prerequisite for high quality products.
WIP systems (washing in place)
Legally there is no difference to CIP, however, WIP generally based on lower hygienic standards and less stringent validation requirements. A much higher amount of manual work and a high level of disassembly are required here.
In contrast to the CIP / SIP applications WIP systems are characterized as cost-effective solutions, but due to higher effort they are considered subordinate in industrial process engineering.
In addition to process development and on-site assembly Wellmann Engineering develops suitable automation concepts and programming.
Thereby Wellmann reaches unlimited flexibility: from a manual control to a fully automated cleaning circuit all is possible. Customer requirements focus on fully automated control which ensures compliance and documentation of fixed parameters. Wellmann always develops suitable control solution for the specific requirements of customers. At the same time there is also the possibility to implement an existing control concept.