This screening machine is suitable for all types of dry and wet screening.
The machine is driven by a vibration motor attached directly to the centre below the screen body. The screen body can vibrate freely and three dimensionally by means of dislocation via precisely adjusted springs. The difference between this model and the KTS tumbler screening machines is the acceleration, which is 3-4 times higher at a comparatively low amplitude. Because the amplitude gets smaller towards the top with each additional screen deck, only 3 decks can be installed per machine.
The centrifugal force of the motor can be altered, as can the offset angle between the upper and lower flyweight in order to adjust the retention time of the product on the screens. The screen frames are equipped with 2 grooves and 2 fixation rings which enable easy and fast re-meshing on-site without much experience or any special tools, particularly where fine-mesh fabrics are involved. The KTS-V sizes 900-1500 can also be produced with the body parts of the KTS tumbler screening machines in order to satisfy the demands of certain food and pharmaceutical products, for example.
This screening machine is particularly suitable for control-, separation- and
dust-removal screening of high-value products.