26 - 28 September 2017 // Nuremberg, Germany

Posting print layout

What information should be shown in the print layout?

Create print layout
Zoom product LOGO_Thermal Flow Sensors TA

Thermal Flow Sensors TA

LOGO_Thermal Flow Sensors TA

Thermal Flow Sensors TA

Request information Request information

Contact us

Please enter your personal information and desired appointment. You can also leave us a message.

Your personal information

Your message for us

Desired appointment during the exhibition

* Compulsory fields you must fill in.
Send
Your message has been sent.

Would you like to use more facilities and advantages of the platform? Then please log in – or register here.

An error has occurred.

Principle of measurement
The principle of measurement is based on heat transport from an electrically heated body in ambient air dependent on the relative velocity between both.

Thermal flow sensors are primarily used for measuring the standard flow velocity Nv from which the standard volume flow and mass flow can be determined irrespective of pressure and temperature.

Höntzsch thermal flow sensors TA are able to measure not only the lowest but also high velocities and comply with all standards for industrial application:

- chemical corrosion resistance
- robust mechanical design
- small dimensions
- wide measuring range
- long-time stability of measured values
-high rate of measurement accuracy

Instrumentation
A combination of a thermal flow sensor TA and a suitable evaluation unit is necessary for successful measurement

Flow sensors TA10
for measuring standard flow velocity, standard volume flow and temperature of medium (probe diameter 10 mm with thin-film sensor element)

- measuring range from 0.2 m/s...150 m/s
- time constant approx. 1s
- maximum working pressure: up to 15 bar
- working temperature range: -10 °C...+140 °C
- optional with certification for zone 0 or 1
- materials: stainless steel, polyimide, epoxy resin, glass

Flow sensors TA20
for measuring standard flow velocity, standard volume flow and temperature of the medium (probe diameter 20 mm with Pt100 sensor element)

- measuring range 0.08...60 m/s
- time constant approx. 20 s
- maximum working pressure: up to 10 bar
- working temperature range: -10 °C...+240 °C
- materials: stainless steel, epoxy resin, glass
- can be sterilized

Calibration laboratory

LOGO_Kalibrierlabor

flowtherm NT

LOGO_flowtherm NT

Vane Wheel Flow Sensors FA

LOGO_Flügelrad-Strömungssensoren FA

Vortex Flow Sensors VA

LOGO_Vortex-Strömungssensoren VA

There are no entries in your notes.

Show notes



top

The selected entry has been placed in your notes!

If you register you can save your notes permanently and access all entries even when underway – via laptop or tablet.

You can register an account here to save your settings in the Exhibitors and Products Database and as well as in the Supporting Programme.The registration is not for the TicketShop and ExhibitorShop.

Register now

Your advantages at a glance:

  • Advantage Save your notes permanently. Use the instant access to exhibitors or products saved – mobile too, anytime and anywhere – incl. memo function.
  • Advantage The optional newsletter gives you regular up-to-date information about new exhibitors and products – matched to your interests.
  • Advantage Call up your notes mobile too! Simply log in and access them at anytime.