26 - 28 September 2017 // Nuremberg, Germany

Posting print layout

What information should be shown in the print layout?

Create print layout
Zoom product LOGO_Rotary Tube Furnaces for Continuous Processes up to 1300 °C

Rotary Tube Furnaces for Continuous Processes up to 1300 °C

LOGO_Rotary Tube Furnaces for Continuous Processes up to 1300 °C

Rotary Tube Furnaces for Continuous Processes up to 1300 °C

Request information Request information

Contact us

Please enter your personal information and desired appointment. You can also leave us a message.

Your personal information

Your message for us

Desired appointment during the exhibition

* Compulsory fields you must fill in.
Send
Your message has been sent.

Would you like to use more facilities and advantages of the platform? Then please log in – or register here.

An error has occurred.

RSRC 80-­500/11 ­ RSRC 120­-1000/13

The RSRC rotary tube furnaces are particularly suitable for processes where continuously running batch material is heated for a short time.

The rotary tube furnace is positioned slightly inclined heated­up to the target temperature. The material is then continuously supplied at the upper end of the tube. It passes through the heated area of the tube and falls on the lower end out of the tube. The time of heat treatment results from the inclination angle, the rotational speed and the length of the working tube, as well as from the flow properties of the batch material.

Equipped with the optional closed loading system for 5 liter charge material incl. receptacle, the furnace can also be used for processes under protective gas or vacuum.

Depending on process, charge and required maximum temperature, different working tubes made of quartz glass, ceramics or metal to be used. This rotary tube furnace is therefore highly adaptable for different processes.

  • Tmax 1100 °C
    • Working tube made of quartz glass open at both sides
    • Thermocouple type K
  • Tmax 1300 °C
    • Open tube made of ceramics C 530
    • Thermocouple type S
  • Housing made of sheets of textured stainless steel
  • Adjustable drive of approx. 2 -­ 45 rpm
  • Digital display unit for the tilting angle of the furnace
  • Beltless drive and split­type furnace housing (opening temperature < 180 °C) provide for very easy tube removal
  • Compact system, rotary tube furnace positioned on a base frame with
    • manual spindle drive with crank to preset the tilting angle
    • switchgear and controls integrated
    • castors
  • Defined application within the constraints of the operating instructions

Additional equipment

  • Three­zone control for the optimization of temperature uniformity
  • Temperature display unit in the working tube with measurement by means of an additional thermocouple
  • Charge control by means of an additional thermocouple in the working tube
  • Different gassing systems with good flushing of the charge with process gas in counterflow (only in combination with feeding system below)
  • Check valve at gas outlet avoids intrusion of false air
  • Vacuum design, up to 10­-2 mbar depending on the applied pump
  • Charging system for continuous material transport, consisting of:
    • Stainless steel funnel incl. electric vibration generator to optimize the material feeding into the working tube
    • Electrically driven screw­conveyor at the inlet of the working tube with 10, 20 or 40 mm pitch and adjustable speed between 0.28 and 6 revolutions per minute, different gear transmissions for other speeds on request
    • Collecting bottle made of laboratory glass at the outlet of the working tube
    • Suitable for operation in gas atmosphere or vacuum
  • Quartz glass batch reactors, Tmax 1100 °C
  • Higher temperatures up to 1600 °C available on request
  • Digital display unit for the tilting angle of the furnace
  • Electric linear drive for the adjustment of the tilting angle
  • PLC controls for temperature control and the control of connected aggregates such as gearshift and speed of the screw­conveyor, speed of the working tube, switching of the vibration generator, etc.

Cold-Wall Retort Furnaces up to 2400 °C

LOGO_Kaltwandretortenöfen bis 2400 °C

High-Temperature Chamber Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C

LOGO_Kammer-Hochtemperaturöfen mit Molybdän-Disilizid-Beheizung mit Faserisolierung bis 1800 °C

Hot-Wall Retort Furnaces up to 1100 °C

LOGO_Heißwand-Retortenöfen bis 1100 °C

Rotary Tube Furnaces for Continuous Processes up to 1300 °C is assigned to following product groups:

There are no entries in your notes.

Show notes



top

The selected entry has been placed in your notes!

If you register you can save your notes permanently and access all entries even when underway – via laptop or tablet.

You can register an account here to save your settings in the Exhibitors and Products Database and as well as in the Supporting Programme.The registration is not for the TicketShop and ExhibitorShop.

Register now

Your advantages at a glance:

  • Advantage Save your notes permanently. Use the instant access to exhibitors or products saved – mobile too, anytime and anywhere – incl. memo function.
  • Advantage The optional newsletter gives you regular up-to-date information about new exhibitors and products – matched to your interests.
  • Advantage Call up your notes mobile too! Simply log in and access them at anytime.