Based on our Inductive Electrification technology, the Sintrol S510 is the most sensitive dust monitor ever. The product was developed to keep the reliability and robustness of our proven S300 Series and enhance its capabilities to detect dust levels from as low as 0,01 mg/m3.
Equipped with a 4–20 mA analog signal output and an RS485 interface, S510 is used for trend monitoring. It is installed downstream from a baghouse, cyclone, dryer or other dust collection system to monitor filter performance as well as particulate emissions. It can also be used for process control in applications where the dust levels need to follow designated limits. S510 is designed for use in any process fitted with bag, ceramic, cartridge filters or cyclones where indicative (qualitative) monitoring is required.
With its three SPST relays and two independent Signal outputs the S510 is also used to detect filter deterioration, blockage or breakage. The alarms can be used for process control (as an ON-OFF system) in flow – no flow situations in bulk solids handling and pneumatic transport applications. Very fast response time, a typical characteristic of these monitors, enables early detection and prevention of expensive product loss to the environment.