Available in two configurations, such as: horizontal and vertical, single and double screw, in different size to meet the requirements of workshops and industrial environments. Both models guarantee high-performance homogenization of the processed material. The vertical mixers are widely used for several applications in: chemical, pharmaceutical, foodstuffs, fodder and mining industries.
These machines are suitable to mix both dry powders and powders with liquid additives. They can be used also for the following processes:
The simultaneous motion of suitable transmission allows the screw to perform two movements: to rotate on its own axis and to orbit along the inner conical vessel wall.
In this way the agitator, which generally consists in a worm screw, conveys product from bottom to the top and creates a horizontal motion flow.
Besides, the conical shape of the mixing vessel allows to obtain a different motion speed of particles which depends on their distance from the bottom where particles move more speedily.
Vertical mixers grant particular advantages:
low power consumption because the mixing screw does not act on the whole product simultaneously;
dust seals not immersed into the product;
minimum heating of substances;
soft mixing action;
total emptying without product retention;
possibility to work with product volume lower than the maximum design capacity;
easy to be thoroughly cleaned.
The horizontal mixers are well known and widely used for several applications in chemical, pharmaceutical, foodstuffs, fodder and mining industries.
Mixing takes place by means of a ribbon agitator that causes product to move following crossed lines.
Mixers series RB and TS are single or double shaft respectively and can be supplied with a capacity up to 10.000 liters.
By adding a lower “V” shaped hopper, having the same capacity as the mixing tank, it is possible to work continuously avoiding discharging intervals.
Some models have been properly designed for the treatment of potential explosive substances according to the 94/9/EC “ATEX” directive and are supplied with relevant conformity declaration.
Leider gibt es für diesen Aussteller kein deutsches Firmenprofil.
“CUSTOMIZED” SOLID HANDLING Thanks to the experience gained over more than 70 years, Nuova Guseo has developed a deep process knowledge in various areas of application such as chemical, pharmaceutical, nutraceutical and cosmetic, for which is also in a position to realize both stand-alone systems and complete process lines, completed with a wide range of accessories.
What does it mean customized solid handling? Nuova Guseo’s mission is the "customer service", in the broadest sense of the term, our proposals are in fact developed and implemented on the basis of specific needs and our growth derives from an ongoing dialogue with the end user in order to grant him a full and effective support.
Among our products:
glove boxes, designed and manufactured in strict compliance with the requirements of safety and ergonomics, configured for different applications and containment levels, granting a high protection level respectively:
for the operator;
for the processed product;
for the environment.
mixers, to homogenous blending of powders and powders with liquids, are realized in vertical and horizontal version. Vertical mixer can be used in vacuum and pressurized processes.
hammer mills, able to reduce to powder a variety of substances having different granulometric sizes (spices, sugars, cereals, dry and not vegetables, minerals, chemical and pharmaceutical compounds). If required, considering particular characteristics of product (fat content, toughness, sensitivity to temperature), these mills can be configured in order to be suitable to run at cryogenic temperature;
cone mills, ideal to obtain a uniform size of the particles for substances with starting inhomogeneous particle size distribution;
jet mills, available for both R&D and production, purposely designed to meet extreme fineness requirements, these mills offer the possibility to obtain particles typically below 5 microns;
screw conveyor, one of the most simple and practical means for transport of solid material. This is an extremely versatile device that allows its use in the most different industrial sectors such as mining, chemical, foodstuff and pharmaceutical;
weighing and bag filling units, simple as reliable equipment, consisting basically of a tank or hopper, of a transport system (screw or vibrating) and of a weighing unit, whose control is acting directly on the extracting screw, modulating the screw speed in order to obtain the fast approaching to the selected weight.